diving, deep-sea: The Development of Diving Equipment
The Development of Diving Equipment
Inventors as early as the 17th cent. sought means whereby divers could stay underwater for extended periods. At that time, various types of diving dress and underwater armor attempted to supply fresh air through a surface pipe kept above the water by a float. Augustus Siebe devised the first practical diving equipment early in the 19th cent. in England. His first suit was of the open type, consisting of a helmet attached to a jacket made of waterproof material. Air was pumped to the helmet through a pipe from the surface—air pressure serving to keep the water level below the diver's head and the air finally escaping through open vents at the bottom of the jacket. The diver had to maintain a generally upright position; a fall could result in drowning because the air in the suit was likely to rush out through the vents. To correct this difficulty, Siebe later developed the closed type of diving suit that, with improvements, is still in general use. Instead of the earlier open vents, the closed type of suit had valves that let air out without letting water in, regardless of the diver's position. The limitations imposed on the helmet diver's lateral movement (because of the connection to the surface) led to early interest in alternative equipment that would permit freer movement, but the scuba apparatus was not developed by Jacques Yves Cousteau and Emil Gagnan until well into the 20th cent. In 1943 successful tests were made of the new compressed-air breathing apparatus, and it has been widely used since.
Sections in this article:
- Introduction
- Development of Diving Vessels
- The Development of Diving Equipment
- Early Diving
- Scuba Diving
- Helmet Diving Suits
- Bibliography
The Columbia Electronic Encyclopedia, 6th ed. Copyright © 2024, Columbia University Press. All rights reserved.
See more Encyclopedia articles on: Sports